Contact Us
Backhoe-loaders 426F2
Request a Quote Download BrochureKey Information
Condition
CAT® Certified Used
Reference
BXO6460
Year
2018
Overview
Rops Cab A/C
Bucket MP 1m3 w/tips
Hydraulics 5FCN/7BNK
4x New Tires
Hammer lines
Extended Stick 14ft
1 Rear Digging Bucket
Working Lights
Key Information
Condition
CAT® Certified Used
Reference
BXO6460
Year
2018
Work hours
3804
Location
VLISSINGEN, NL
VIN
EJ401523
Availability
Sold
Certification
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Technical specifications for 426F2
- ENGINE
- Power - Net66.4 kW
- ModelCat 3054C Mechanical Turbo
- EmissionsEngine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards.
- Rated Power (Standard) - 2,200 rpm - Gross - ISO 1439668.5 kW
- Net Peak Power Rating @ 2,200 rpm - SAE J134966.4
- Torque Rise - 1,200 rpm - Net38
- Maximum Torque - 1,400 rpm394 N·m
- Bore105 mm
- Stroke127 mm
- WEIGHTS
- Operating Weight - Nominal8425 kg
- Operating Weight - Maximum11000 kg
- Operating Weight8425 kg
- HYDRAULIC SYSTEM
- TypeClosed Center
- Pump TypeVariable Flow, Axial Piston
- Maximum Pump Capacity132 l/min
- System Pressure - Backhoe250 bar
- System Pressure - Loader250 bar
- NOISE LEVEL
- Inside Cab80 dB(A)
- Outside Cab104 dB(A)
- TRANSMISSION
- NoteTravel speeds of Four Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires.
- Power Shuttle Transmission - Forward 1st5.6 km/h
- Power Shuttle Transmission - Forward 2nd9.3 km/h
- Power Shuttle Transmission - Forward 3rd21 km/h
- Power Shuttle Transmission - Forward 4th40 km/h
- Power Shuttle Transmission - Reverse 1st5.6 km/h
- Power Shuttle Transmission - Reverse 2nd9.3 km/h
- Power Shuttle Transmission - Reverse 3rd21 km/h
- Power Shuttle Transmission - Reverse 4th40 km/h
- SERVICE REFILL CAPACITIES
- Cooling System22 l
- Fuel Tank160 l
- Engine Oil - With Filter8.8 l
- Transmission - Power Shuttle - AWD15 l
- Rear Axle16.5 l
- Rear Axle - Planetaries1.7 l
- Front Axle (AWD)6.5 l
- Front Axle (AWD) - Planetaries0.7 l
- Hydraulic System106 l
- Hydraulic Tank40 l
- WEIGHTS*
- Operating Weight - Estimated8425 kg
- Operating Weight - ROPS Capacity - Maximum11000 kg
- Counterweights - Base115 kg
- Counterweights - Medium240 kg
- Note*Machine Configuration – standard engine, standard stick hoe, standard cab with A/C, AWD standard shift transmission, 0.96 m3 MP loader bucket, 24 inch standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, no counterweight, 80 kg operator and full fuel tank.
- Minimum Counterweight Recommendations - E-Stick: E-Stick210 kg
- Minimum Counterweight Recommendations - E-Stick: Loader Bucket - MP with Fork Brackets691 kg
- Minimum Counterweight Recommendations - E-Stick: Loader Bucket - GP530 kg
- Minimum Counterweight Recommendations - E-Stick: Loader Bucket - MP681 kg
- Counterweights - High460 kg
- AXLES - ALL WHEEL DRIVE (AWD)
- Features (1)Heavy-duty rear axle with self adjusting inboard brakes and final drives.
- Features (2)AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance.
- Features (3)AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability.
- AXLE RATINGS
- Front Axle (AWD) - Static22964 kg
- Front Axle (AWD) - Dynamic9186 kg
- Rear Axle - Static22964 kg
- Rear Axle - Dynamic9186 kg
- STEERING
- TypeFront Wheel
- Power SteeringHydrostatic
- AWD Cylinder, One (1) Double Acting - Bore65 mm
- AWD Cylinder, One (1) Double Acting - Stroke120 mm
- AWD Cylinder, One (1) Double Acting - Rod Diameter36 mm
- Turning Circle - AWD (inner wheel not braked) - Outside, Front Wheels8.18 m
- Turning Circle - AWD (inner wheel not braked) - Outside, Widest Loading Bucket10.97 m
- BRAKES
- TypeFully enclosed boosted, hydraulic, multiple discs.
- Features (1)Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft.
- Features (2)Completely enclosed and sealed.
- Features (3)Self-adjusting.
- Features (4)Dual foot-operated boosted brake pedals can be interlocked for roading.
- Features (5)Parking/secondary brakes are independent of the service brake system. Parking (secondary) brake is mechanically applied through a hand lever located in the right side console.
- Features (6)Meets ISO 3450:2011 and CMVR requirements.
- EXCAVATOR BUCKET DIMENSIONS AND PERFORMANCE: STANDARD STICK
- Bucket Dig Force57.22 kN
- Digging Depth, Manufacturer's Maximum4707 mm
- Loading Reach1528 mm
- Maximum Operating Height5721 mm
- Stick Dig Force35.3 kN
- Digging Depth, 2440 mm Flat Bottom3740 mm
- Reach from Swing Pivot at Ground Line5603 mm
- Digging Depth, 600 mm Flat Bottom, Manufacturer's4668 mm
- Bucket Rotation205°
- Stabilizer Overall Width2242 mm
- Digging Depth, 600 mm Flat Bottom4092 mm
- Digging Depth, SAE Maximum4116 mm
- Loading Height3934 mm
- Swing Arc180°
- LOADER BUCKET DIMENSIONS AND PERFORMANCE: MP - 1 M3
- Maximum Operating Height4348 mm
- Tilt Breakout Force60.47 kN
- Dump Height at Maximum Angle2766 mm
- Tipping Load at Breakout Point6301 kg
- Maximum Hinge Pin Height3449 mm
- Lift Breakout Force53.95 kN
- Maximum Bucket Rollback at Ground Level42°
- Grill to Bucket Cutting Edge, Carry Position1449 mm
- Width2262 mm
- Dump Reach at Maximum Angle822 mm
- Digging Depth145 mm
- Lift Capacity at Maximum Height3496 kg
- Maximum Grading Angle116°
- Dump Angle at Full Height46°
- Capacity1 m³
- EXCAVATOR BUCKET DIMENSIONS AND PERFORMANCE: E-STICK EXTENDED
- Stabilizer Overall Width2242 mm
- Maximum Operating Height6338 mm
- Loading Reach2546 mm
- Stick Dig Force24.59 kN
- Swing Arc180°
- Loading Height4491 mm
- Digging Depth, SAE Maximum5208 mm
- Reach from Swing Pivot at Ground Line6585 mm
- Digging Depth, Manufacturer's Maximum5697 mm
- Digging Depth, 2440 mm Flat Bottom4887 mm
- Digging Depth, 600 mm Flat Bottom, Manufacturer's5684 mm
- Bucket Dig Force56.61 kN
- Bucket Rotation205°
- Digging Depth, 600 mm Flat Bottom5168 mm
- LOADER BUCKET DIMENSIONS AND PERFORMANCE: MP WITH FORKS - 1 M3
- Maximum Operating Height4832 mm
- Dump Reach at Maximum Angle822 mm
- Digging Depth145 mm
- Tilt Breakout Force59.26 kN
- Lift Capacity at Maximum Height3172 kg
- Tipping Load at Breakout Point6048 kg
- Maximum Hinge Pin Height3449 mm
- Lift Breakout Force51.04 kN
- Dump Height at Maximum Angle2766 mm
- Capacity1 m³
- Width2262 mm
- Maximum Bucket Rollback at Ground Level40°
- Dump Angle at Full Height46 °
- Grill to Bucket Cutting Edge, Carry Position1449 mm
- Maximum Grading Angle116°
- EXCAVATOR BUCKET DIMENSIONS AND PERFORMANCE: E-STICK RETRACTED
- Digging Depth, 2440 mm Flat Bottom3806 mm
- Loading Reach1648 mm
- Reach from Swing Pivot at Ground Line5657 mm
- Digging Depth, 600 mm Flat Bottom4158 mm
- Loading Height3947 mm
- Maximum Operating Height5722 mm
- Bucket Dig Force56.61 kN
- Stabilizer Overall Width2242 mm
- Digging Depth, Manufacturer's Maximum4756 mm
- Stick Dig Force33.66 kN
- Digging Depth, 600 mm Flat Bottom, Manufacturer's4719 mm
- Digging Depth, SAE Maximum4191 mm
- Swing Arc180°
- Bucket Rotation205°
- BACKHOE DIGGING DEPTH
- Dig Depth4707 mm
- E-Stick Extended5697 mm
- E-Stick Retracted4756 mm
- LOADER BUCKET DIMENSIONS AND PERFORMANCE: GP - 1.05 M3
- Capacity1.05 m³
- Width2262 mm
- Lift Capacity at Maximum Height3610 kg
- Lift Breakout Force54.48 kN
- Tilt Breakout Force53.91 kN
- Tipping Load - Breakout Point6225 kg
- Maximum Hinge Pin Height3449 mm
- Dump Angle at Full Height46°
- Dump Height at Maximum Angle2735 mm
- Dump Reach at Maximum Angle897 mm
- Maximum Bucket Rollback at Ground Level41°
- Digging Depth112 mm
- Maximum Grading Angle113°
- Grill to Bucket Cutting Edge, Carry Position1480 mm
- Maximum Operating Height4370 mm
- LOADER BUCKET DIMENSIONS AND PERFORMANCE: MP - 1.0 M3
- Capacity0.96 m³
- Width2262 mm
- Lift Capacity at Maximum Height3475 kg
- Lift Breakout Force54 kN
- Tilt Breakout Force60.48 kN
- Tipping Load - Breakout Point7110 kg
- Maximum Hinge Pin Height3447 mm
- MACHINE DIMENSIONS - 426 PHASE 2: GP - 1.05 M3
- Overall Length in Roading Position225 in
- Overall Transportation Length5677 mm
- Overall Transportation Height - 4.3 m3757 mm
- Overall Width2346 mm
- Height to Top of Cab/Canopy2895 mm
- Height to Top of Exhaust Stack2716 mm
- Rear Axle Centerline to Front Grill2708 mm
- Wheelbase AWD2200 mm
- MACHINE DIMENSIONS - 426 PHASE 2: MP - 1 M3
- Overall Length in Roading Position5674 mm
- Overall Transportation Length5681 mm
- Overall Transportation Height - 4.3 m3757 mm
- Overall Width2346 mm
- Height to Top of Cab/Canopy2895 mm
- Height to Top of Exhaust Stack2716 mm
- Rear Axle Centerline to Front Grill2708 mm
- Wheelbase AWD2200 mm
- NoteDimensions and performance specifications shown are for machines equipped with 12.5/80-18 front tires, 16.9-28 rear tires, standard cab, standard stick with 610 mm standard duty bucket, and standard equipment unless otherwise specified.
Media Gallery
Expand Your Possibilities, Not Your Budget.
There is used equipment, and then there are CAT® Certified Used equipment - carefully selected, inspected, and maintained to higher standards. The result? Performance as good as new, guaranteed.
